30–35mm Formula 4x4 Lift Kit with Height-Adjustable Struts to Suit BYD Shark 6 2024-On
Upgrade your BYD Shark 6 with the SHARK-002 Formula 4x4 Lift Kit, engineered to provide an approximate 30–35mm increase in vehicle ride height while improving ground clearance, handling and suspension control across sealed roads, touring conditions and recreational off-road terrain.
This vehicle-specific suspension package combines Formula 4x4 height-adjustable front struts and long-travel rear shock absorbers with matched King Springs front and rear coil springs.
The Formula 4x4 front struts feature height adjustment, allowing the front ride height to be fine-tuned during installation to achieve the required vehicle stance and accommodate permanent accessories and operating load.
When installed as a complete SHARK-002 package, the kit is designed to provide approximately 30–35mm of overall vehicle lift from standard ride height. Final ride height may vary depending on factory suspension height, vehicle condition, permanent accessories and load.
Key Features
- Approximately 30–35mm vehicle lift from standard height
- Formula 4x4 height-adjustable front struts
- Long-travel Formula 4x4 rear shock absorbers
- Improved ground clearance and suspension control
- Improved vehicle stability and ride performance
- Matched front and rear suspension components
- Suitable for everyday driving, touring, towing and recreational off-road use
- Designed for Australian road and touring conditions
Kit Contents
- 2 x Formula 4x4 height-adjustable front struts 80422
- 2 x Formula 4x4 rear shock absorbers 50041
- 1 x pair King Springs front coil springs KBFR-50
- 1 x pair King Springs rear coil springs KBRR-51HD
Spring and Lift Information
The supplied King Springs KBFR-50 front and KBRR-51HD rear coil springs are matched with the Formula 4x4 struts and shock absorbers as part of the complete SHARK-002 suspension package.
While individual spring specifications may indicate different nominal lift figures, the complete SHARK-002 kit is designed to raise the BYD Shark 6 approximately 30–35mm from standard vehicle ride height.
The height-adjustable front struts allow the front suspension to be set during installation to achieve the appropriate ride height and vehicle stance.
Permanent load includes accessories or equipment regularly fitted to or carried in the vehicle, such as bull bars, underbody protection, canopies, drawers, tools, recovery equipment and towing accessories.
Correct spring selection and installation are essential for achieving a level stance, suitable ride quality and reliable suspension performance. Final ride height may vary depending on factory ride height, vehicle condition, accessories and operating load.
Important Fitment Information
SHARK-002 is designed to suit the BYD Shark 6 2024-on.
The supplied long-travel Formula 4x4 shock absorbers must be fitted with the listed King Springs as a complete matched suspension package.
Confirm the vehicle model, build date, drivetrain, suspension configuration and permanent accessory load before ordering.
After you have purchased this lift kit, one of our suspension experts will contact you to confirm your order details, intended vehicle use, permanent accessory load and vehicle specifications. This helps ensure the supplied suspension package is appropriate for your vehicle.
When purchasing through our Click & Fit service, we will also confirm your preferred installation location and booking date.
Formula 4x4 Lift Kit Warranty
Formula 4x4 lift kits are covered by a 5-year warranty, subject to the applicable warranty terms and conditions. Activate your warranty online and learn more here.
Premium Lift Kit Packaging & Shipping
When purchased, this lift kit will be delivered via Fulcrum’s ‘Premium Packaging’ service. This is an all-inclusive service, designed to ensure extremely fast delivery of your order. Your suspension components will be packaged securely to guarantee they are protected during transit. We provide our Premium Packaging service for all our shipping methods. Including Deliver to Door (Home Delivery), Click & Fit and Free Pickup (Click & Collect). You can find out more about our premium lift kit packaging by visiting this page. If you have any questions, you can call us on 1800 385 278.
Lift Kit Fitting Instructions
All lift kits are shipped with a set of lift kit fitting instructions and also include details on upgrading your warranty. The instructions provided are general in nature. It is highly recommended that you get your lift kit installed by a mechanic or suspension technician, preferably with wheel alignment facilities.
Springs & Lift Heights
The springs create the lift, so selecting the correct front and rear spring rates is essential for achieving a level stance, comfortable ride and reliable suspension performance. While the kit title specifies a lift height, the final front and rear height increase will depend on your vehicle’s permanent accessories, constant load and intended use.
After you place your order, a Fulcrum Suspensions specialist will contact you before processing it. We will confirm your vehicle details, accessories, regular load, towing requirements and driving conditions to ensure the correct springs are supplied.
A constant load is any weight permanently fitted to or carried in the vehicle, such as bull bars, winches, bash plates, batteries, drawers, canopies, tools and recovery equipment. Engine type and other vehicle specifications can also affect spring selection. Where possible, install all permanent accessories before fitting your lift kit so the suspension can be matched correctly from the outset.
The spring rating should closely match the vehicle’s actual constant load. For example, a vehicle carrying approximately 250kg permanently should use a spring designed for that load range.
Springs rated below the vehicle’s constant load may become overloaded, causing sagging or premature failure. This can also occur when towing, as caravan, boat or trailer ball weight adds load to the rear suspension.
Springs rated substantially above the actual load can produce an excessively firm ride and may contribute to issues such as shock absorber top-out or coil spring trapping. The front and rear springs must also be correctly matched, as an unsuitable spring rate at either end can leave the vehicle sitting nose-high or nose-low.
For occasional additional loads or towing, an airbag helper kit may be recommended. Airbags support the springs when carrying temporary loads but do not replace correctly rated springs and are not designed to carry the vehicle’s load on their own.
There is no need to determine every specification yourself. Our suspension specialists will review your requirements after purchase and confirm the most suitable configuration for your vehicle.
For assistance before ordering, contact us through online chat or call our team.
| SKU | SHARK-002 |
|---|---|
| Foot Note 1 | Kit contains: Formula 4x4 Height Adjustable Struts 2 x 80422, Formula 4x4 Shock Absorbers 2 x 50041, King Springs 1 x KBFR-50 & 1 x KBRR-51HD |
| Components Per | 1 Kit |
| Sub brand | Formula 4x4 |
| EAN | 9317745086994 |
Downloads
Product Stock
Please be advised that our stores do not hold any stock. In order to make sure things go as fast as possible you can purchase your parts online. If you would like to have your parts installed by us please choose Click & Fit at the checkout.
You can use the shipping calculator to find your shipping costs, your closest pick up or install locations. The shipping calculator will also show all shipping and installation prices. Shipping is free if you choose to get your item installed by us.
When our product stock levels are low, or current stock is allocated to orders, our website may show an ‘in-stock’ status when in fact the item might be sold out. We will advise within 48hrs; stock availability, order status and shipping details.
Delivery Methods
1. Select “Click & Fit” as a delivery method during the checkout process and you will be given a special fitted price to have both the product delivered and installed. A suspension expert will be assigned to your order, who will organise everything for you and will help you every step of the way. You can sit back and relax, knowing that your car is going to be looked after by suspension experts.
2. Select “Free Pickup” as a delivery method during the checkout process and you will be given free delivery to your nearest Fulcrum outlet where you can collect the parts. We will text and email you all your tracking details.
3. Select “Deliver to Door” as a delivery method during the checkout process and we will deliver your order direct to your nominated delivery address. We will text and email you all your tracking details.
Shipping
We offer FREE shipping to all metro areas (excluding WA, TAS and NT).
If you live on the Australian coast, that does not mean you are subject to free shipping.
Express shipping times and free shipping times are only to be counted once the order has been shipped from our warehouses. Our free shipping and express shipping services both have the same order processing times. We first have to raise the order, then we send it to one of our warehouses for processing and once ready it will be shipped from the warehouse. The difference between express and free shipping services, is the time it takes for the item to be transported from our warehouse to your address.
Our free shipping policy is determined by densely populated metro locations and the viability of distance travelled from our distribution centres. We are constantly expanding our warehousing, so areas covered by free shipping are subject to change. See our shipping policy here.
Returns
We guarantee the fitment and quality of our products, but if you choose to return an item we offer a generous 60 day returns policy. See our returns policy here.
Warranty
All products sold by Fulcrum Suspensions are covered by a national warranty. This products warranty is subject to conditions from the date of purchase, unless otherwise stated on the item.
Warranty claims must meet certain criteria and be sent to Fulcrum Suspensions with a receipt to be eligible for a refund. See full warranty claim criteria here.